Description
BCD TRANSPAC XT SuperFabric Dive Rite Weight น้ำหนักบนผิวน้ำ 3.8 กก.
TRANSPAC XT with TRAVEL XT WING+20 lb Weight Pockets
TRANSPAC XT HARNESS
Description
Born of necessity and refined over years of extreme use, the TransPac XT is Dive Rite’s flagship harness. The TransPac XT was Inspired by a mountaineer’s style backpack distributing weight across the diver’s hips and back, not the shoulders. High density foam pads on the shoulders and waist, along with a lumbar support pad provide superior comfort above and below the water.
Originally designed by Dive Rite CEO Lamar Hires for his early expeditions to the remote Karst regions of Japan. On these expeditions he needed a rugged harness system that would allow him to utilize backmounted doubles and single, as well as sidemount in some of the smaller cave passages. In addition to being a versatile diving tool, the TransPac also needed to be comfortable enough to hike tanks a mile back into a dry cave.
SUPERIOR COMFORT
Soft backplate. Flexible and comfortable on the back
Wrap-around hip pads. Dual density foam pads provide cushioning and support and help distribute weight evenly across the hips and back
Ergonomic shoulder pads. Double-foam pads under the webbing strap provide padding comfort to the shoulder area
Lumbar support pad. Molded foam pad contoured in the right places with mesh airflow channels provides added comfort and instant water draining when topside
Chafe-free comfort. The padded shoulder straps and hip straps provide a chafe-free diving experience
Backpacking style waist belt. Supports and balances weight across the hips and back for even distribution of weight in and out of the water
Load distribution. The chest strap along with the crotch strap work together with the backpacking style waist belt and pivot ring shoulder straps to evenly distribute weight for maximum stability and comfort in the water
MAXIMUM ADJUSTABILITY
Shoulder straps and waist strap: Easily adjustable in length to allow for diving any type of exposure suit
Crotch strap (removable): Pull adjustment to set the exact length needed to accommodate any type of exposure suit
Cross-chest strap: Buckles across the chest with a pull adjustment to fine tune the shoulder straps in the exact position desired
Shoulder straps attach to the top of the backplate at pivot rings, allowing for easy adjustment
Pull strap on the quick-release buckles between the shoulder straps and waist strap allow for fine adjustments and a perfect fit
Shoulder strap attachment waist plates slide to allow for positioning on the waist strap at the desired location
Waist webbing can be easily replaced allowing for many years of use
UNLIMITED VERSATILITY AND CUSTOMIZATION
Dive a single tank, double tanks, a rebreather, or sidemount by simply swapping out the wing along with some additional mounting accessories
Compatible with any XT or EXP wing in the Dive Rite line
Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease
TECHNICAL DETAILS
- Sizes: Small to XXL (including Large and XL Short sizes)
- 1000 denier ballistic nylon backplate
- Marine grade stainless steel
- 2-inch D-rings
- Acetyl resin quick release buckles
- 2-inch (50 mm) webbing rated at 7,000 pounds breaking strength
- 2 x 36-inch (5 x 91.4 cm) cam straps
- 1.5-inch (3.8 cm) crotch strap
TRAVEL SERIES (Wing) SuperFabric
Description
A lightweight wing designed for single-tank, warm water diving, our Travel series of wings are small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25lbs/11.3 kg of lift, the Travel can accommodate one 80ft3/12 L tank with no more than 16lbs. of additional weight.
With its donut-shape, the Travel wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.
Divers may choose from our durable 1680 ballistic nylon EXP material, available in 5 different color combinations, or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver’s side panel. Both the Travel EXP (Model BC 4100) and Travel XT (Model 5100) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A.
As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness.
Tech
- TECHNICAL DETAILS
- Model BC4100 Travel EXP outer bag is made of durable 1680 denier ballistic nylon that resists tears and abrasion
- Available in 5 color combinations: Black/Grey (Standard), Black/Red, Black/Pink, Black/Blue, and Spa Blue/Blue.
- Model BC5100 Travel XT outer bag is made of SuperFabric brand technology outer shell and 1680 ballistic nylon diver’s side panel.
- Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures
- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
- Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow along with either15-inch, 22-inch or 27-inch low pressure inflation hose.
- A set of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or singles mounting plate.
- Approximate dimensions uninflated: 21.5-in H x 15-in W (54.6cm x 38.1cm)
TIPS
To avoid unnecessary wear and tear, remove metal backplates from the wing for transport and do not carry a metal plate stuffed into a dive bag along with a wing and other soft goods.
BCD TRANSPAC XT Dive Rite Official website :
Reviews
There are no reviews yet.